Tweezers placing a microcontroller on a printed circuit board
Illustrative data
  1. Controller · prototype · Rev. 0.2
  2. Current draw test · 38 mA

In-house electronics for problems that keep coming back

When the same problem shows up in several installations, we turn it into a product: boards, controllers and equipment designed by us, proven in the field and supported for the long term.

Talk to us

Nothing is sold as a product until it has worked in a real installation

What we do

Hardware and firmware for industrial control, measurement and communications.

PCB design
Schematics, board layout, component selection and manufacture of prototypes and short runs.
Firmware
Control, communications and diagnostics on microcontrollers and embedded processors.
Custom controllers
For a specific machine or process, when a general-purpose PLC is either not enough or too much.
Telemetry
Data acquisition and transmission over local network, cellular or long-range radio, for remote sites.
Energy metering
Electrical metering units for machines and panels that integrate with any system.
Own machines
Compact equipment combining mechanics, electronics and software, designed entirely by us.

How a product is born

We do not design hardware for its own sake. We design it once the market has asked for it several times.

Tell us what you see in your plant

  • First, the project

    We solve the problem for one client using off-the-shelf components.

  • Then, the repetition

    If the same problem appears at other sites, a product is needed.

  • Next, our own design

    Dedicated hardware and firmware, more reliable and cheaper than a pile of generic parts.

  • Always, the field test

    It works in a real installation before it is sold as a product.

What we build and what we do not

We design the electronics that give us an edge, not every component in the system. We do not compete with established PLC or robotics manufacturers: our equipment integrates with theirs.

In-house development

  • Boards for specific applications
  • Firmware and communications
  • Controllers and telemetry modules
  • Monitoring equipment
  • Enclosures and assembly

We do not develop

  • General-purpose PLCs
  • Complete industrial robots
  • Safety-critical electronics without certification
  • High-volume electronics assembly on price

Frequently asked questions

Another question? Write to us
Can you develop a board for my product?

Yes, if it fits what we do: control, data acquisition, communications and moderate power. We start with a working prototype, validate it with you and then prepare the production run with a PCB manufacturer.

Who owns the design?

That is agreed in the proposal. For custom development, the client usually receives the design. When the work builds on our own products, their use is licensed.

Do you have products available already?

We are turning the solutions that repeat most across our projects into products. If you have a problem that fits, tell us about it: that is exactly how they are born.

Does the equipment comply with regulations?

Any equipment sold as a product meets the applicable regulations (electromagnetic compatibility, low voltage and any others that apply) before it goes on sale. Prototypes and custom developments are delivered with a record of the tests carried out and, where relevant, a certification plan.

Related articles

Visit the blog

Other divisions

Which machine or process do you want to improve?

The first conversation is free. You get a concrete assessment back, not a brochure.

Tell us about your project